YOU ARE HERE:
Home » Products » Noise Barrier Panels » High Noise Protection Fence Barrier
358 Mesh Structure High Security Fencing Systerm is well known in the world as an anti-climb & anti-cut
through barrier. It provides the lowest level of visual impact to the surroundings, this fuction enables it suitable for traffic security fencing, prison fencing and secure units and military uses.
The welded mesh panels are welded with high quality carbon steel wires. It is designed to give attractive,
long lasting and secure perimeter protection for industrial and commercial properties, public utilities,
and it is really suited for electronic alarm and detection systems - no blind spots.
High security fence has the close mesh structure which makes it virtually impossible to climb. The close mesh also means that the fence is very difficult to cut with anything but power tools. The panels are covered by a continuous heavy weight clamp bar, which offers no place for leverage to prise it off. The system also has no removable fixings meaning that panels cannot be removed by would be intruders. This system has good through visibility and is also aesthetically pleasing.
Pvc coated anti-climb 358 mesh fencing:
Material: Plastic Coated Iron Wire; Hot Dipped Galvanized Low-Carbon Iron Wire
Size One: Aperture: 3/4" 1/2'' 1'';1/4''-8''
Wire Gauge: 0.25-8mm
Size Two:
Aperture: 12.7*72.6mm
Wire Gauge: 3.0-4.0mm
358 Mesh Panels Types:
Panel-Type A(2D View)
| Mesh | Wire Thickness | Surface Treatment | Panel Width | Height |
| 76.2 x 12.7 mm | Horizontal wire: 3.0, 3.5, 4.0 mm Vertical wire: 4.0 mm | Galvanized and Electrostatic polyester coated or Hot dipped galvanized | 2.50m Or 2.20m | 1800 mm |
| 2000 mm | ||||
| 2100 mm | ||||
| 2200 mm | ||||
| 2400 mm | ||||
| 2500 mm | ||||
| 3000 mm |
*Weld strength: - 75% of the minimum tensile strength of the wire; Tensile range 540-690 N/m2
Panel-Type B(3D View)
| Mesh | Wire Thickness | Surface Treatment | Folds NOS | Panel Width | Height |
| 76.2 x 12.7 mm | Horizontal wire: 3.0, 3.5, 4.0 mm Vertical wire: 4.0 mm |
Galvanized and Electrostatic polyester coated or Hot dipped galvanized | 3 | 2.50m Or 2.20m | 1800 mm |
| 3 | 2000 mm | ||||
| 4 | 2100 mm | ||||
| 4 | 2200 mm | ||||
| 4 | 2400 mm | ||||
| 5 | 2500 mm | ||||
| 6 | 3000 mm |
*Weld strength: - 75% of the minimum tensile strength of the wire; Tensile range 540-690 N/m2
Panel-Type C(2D View, adding wire)
| Mesh | Wire Thickness | Surface Treatment | Panel Width | Height |
| 100 x 15 mm | Horizontal wire: 3.5 mm Vertical wire: 5.5 mm | Galvanized and Electrostatic polyester coated or Hot dipped galvanized |
2.50 m Or 2.20 m |
1800 mm |
| 2000 mm | ||||
| 2100 mm | ||||
| 2200 mm | ||||
| 2400 mm | ||||
| 2500 mm | ||||
| 3000 mm |
*With additional horizontal wire of 3.5mm at 18.00cm intervals
*Weld strength: - 75% of the minimum tensile strength of the wire, Tensile range 540-690 N/m2
